The <ME01 series> is an innovative protection IC that features a built-in OTP (One Time Programmable ROM) to make adjustments of the detection voltage possible even after the IC has been molded.
The IC can be used as a high-precision product with adjusted detection voltage in the same way as the previous model, however detection voltages can also be adjusted while embedded in a PCM (protection module), which allows optimum design even following sudden changes to specifications. If detection voltage is adjusted when products are shipped in response to newly requested specifications, samples can be shipped with 1/4 the manufacturing time of the previous model.
Correcting adjustments to fluctuating characteristics that until now had occurred during the manufacturing process into the final process of IC manufacturing or using PCM provides an approximately 5% increase in usable battery capacity.

• High-precision overcharge detection voltage accuracy ±8mV(-5℃ to 55℃)
• High-precision overcurrent detection voltage accuracy ±10% or less
• Sample lead time for developing new specification products 2 weeks

Overcharge detection	3.6 to 5.0 V (5mV step) accuracy ±5mV (25℃), ±8mV (-5℃ to 55℃)
Overcurrent detection	2.0 to 3.0 V (50mV step) accuracy ±35mV
Discharge overcurrent detection	+20 to +150mV (1mV steps) accuracy ±10% or less
Charge overcurrent detection	-150 to -20mV (1mV steps) accuracy ±10% or less
Short circuit detection	+40 to +250mV (1mV steps) accuracy ±10%
Consumption current (normal)	3.5µA typ. 6.0µA max.
Consumption current (standby)	0.5µA max. (when excess discharge automatic recovery function is used) 0.1µA max. (when excess discharge automatic recovery function is not used)
0V charge inhibition battery voltage	0.9 V fixed or 1.3 to 1.8V (0.1V steps)
Package	WLCSP, PLP-6, SOT-26B
Dimensions	WLCSP 1.09×0.81×0.38 (W×D×H) PLP-6 1.50×1.50×0.55 (W×D×H) SOT-26B 2.9×2.8×1.15 (W×D×H)   (Unit : mm)