■Overview
With batteries used for electronic tools requiring greater capacity in recent years, secondary lithium ion batteries are being used more often.
There are currently 3 to 5 cells within a battery, and the 3-cell battery specifications (10.8V) that make up the majority of the market have a greater need for temperature protection and multi-step overcurrent protection.
Using the <MM3783> enables a lower cost and higher level of safety than could be achieved using existing circuits.
§ Features
1. |
Overcharge, overdischarge and overcurrent protection functions built-in. |
2. |
Monitor and protect against discharge overcurrent with 3 steps (overcurrent 1, overcurrent 2, short circuit protection) |
3. |
Detection of high and low temperatures with 3 values with an external NTC thermistor to protect the battery pack. |
4. |
Charging prohibited/permitted can be selected for 0V battery (optional) |
§ Main specifications
 |
|
 |
Overcharge detection |
3.6 to 4.5V (5mV steps) accuracy ±25mV |
|
Overcurrent detection |
2.0 to 3.0V (50mV steps) accuracy ±80mV |
|
Discharge overcurrent detection voltage 1 |
30 to 300mV (5mV steps) accuracy ±15%/±10mV |
|
Discharge overcurrent detection voltage 2 |
2x/4x discharge overcurrent 1 accuracy ±20% |
|
Short circuit detection voltage |
4x/8x discharge overcurrent 1 accuracy ±30% |
|
Discharge overcurrent detection voltage |
-300 to -20mV (5mV steps) accuracy ±15%/±10mV |
|
Temperature protection detection temperature |
-30℃ to 80℃ (5℃ steps, 3 values can be set) accuracy ±3℃ |
|
REG terminal output voltage |
1.5 to 3.0V (50mV steps) accuracy ±25mV |
|
Package |
TSOP-16B |
|
Dimensions |
5.0×4.4×1.1mm (W×D×H) |
|
 |
 |
