MMR902 | Low Supply Voltage, Digital Output Gage Pressure Sensor | SENSOR ICs

SENSOR ICs


Low Supply Voltage, Digital Output Gage Pressure Sensor MMR902
SENSOR ICs INDEX	\| HTML \| PDF \|

[Outline]

This product is a Gage pressure sensor which MEMS^*1 Gage pressure sensor and AFE IC^*2 are modularized. It digitally outputs a pressure value which was corrected in the module.
Customers need no correction because it corrects and outputs the differences of sensors and temperature characteristics. It does not require complicated sensor drive or control circuit, and devices with high performance can be made only with this module and an external microcontroller which will be the host.

*1 MEMS	: [Micro-Electro-Mechanical Systems]
*2 AFE IC	: [Analog Front End IC]

[Features] (Unless otherwise specifi ed, Topr=+25°C)

1. Small package : 7.0 (W) ×7.0 (D) ×7.2 (H) mm

2. It corrects the differences of sensors and temperature characteristics when shipped from our factor

3. It digitally outputs pressure value by a built-in sequencer. (SPI, I²C)

4. Specifications

● Pressure type: Gauge pressure (Based on atmospheric pressure)
● Pressure medium: Air (no condensation)
● Operating pressure range: -10 to 330mmHg (-1.33 to +43.99kPa)
● Pressure effective resolution: 0.040/0.028/0.020/0.005mmHgRMS
● Accuracy: ±2mmHg (266Pa)
● Power supply voltage range: 1.7 to 3.6V
● Conversion time: 3.91/7.81/15.625/250msec
● Current consumed when pressure is measured: 650µA
● Standby current consumption: 0.1µA
● Operating temperature range: 5~45℃

[NOTE]
-Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
-The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.