With the increasing growth of a networked society, where all manner of people and products are becoming interconnected, attention has turned to PLC that can be used simply and with existing equipment.
Mitsumi Electric has focused on products that comply with IEEE 1901 from an early stage, and has developed this product as a compact, low power consumption type module with broad versatility.

1.	Can be mounted in common equipment specified by IEEE 1901 international standards
2.	Physical communication speed: maximum logical speed of 240 Mbps
3.	Low power consumption: approximately 1.3 W
4.	Compact shape ideal for embedded applications (70 x 27 x 8.4 mm)
5.	Can change settings without a PC

< PLC interface >
Standard	IEEE 1901
Operating frequency range	2 MHz to 28 MHz
Modulation method	Wavelet OFDM method
Communication speed (logical and physical speeds)	Up to 240 Mbps
Security	AES 128 bit encryption
No. of registered devices	Up to 128 (128 terminal devices for 1 master device)
No. of recommended simultaneous communication devices	1 master device, 15 terminal devices (when using broadband communications)

< LAN interface >
Standard	IEEE 802.3/IEEE 802.3u-compliant
Communication mode	IEEE 802.3-compliant (10Base-T, 100Base-TX) MDI/MDI-X automatic cross/straight recognition
No. of ports	1 port
Compatible protocols	IPv4/IPv6/TCP/UDP
No. of IP devices that can be connected	Up to 8 devices per PLC (recommended)

< Electrical characteristics >
Maximum transmission level	2 MHz to 15 MHz: -48 dBm/Hz 15 MHz to 28 MHz: -58 dBm/Hz
Pin layout	2nd generation-compatible
Power supply	DC 1.2 V, 3.3 V, 10.5 V
Power consumption	Approximately 1.3 W

< Operating environment >
Temperature	During operation: 0 to +55ºC(module ambient temperature) During saves: -10 to +60ºC
Humidity	During operation: 20 to 85% (non-condensing) During saves: 30 to 75% (non-condensing)
Dimensions	70.0 x 27.0 x 8.4 mm (W x D x H, excluding protrusions)
Weight	10 g